Vol. 39 No. 1 (2012): Special Issue: Selected Papers from Structural Engineering Convention 2010

Published: 01-05-2012

Articles

Numerical analysis of cold-formed steel open sections under axial compression

G. Beulah Gnana Ananthi, G.M. Samuel Knight, Nagesh R. Iyer

1-8
Effect of cross inclined bars on the behaviour of shear wall – floor slab joint under lateral cyclic loading

S. Greeshma, K.P. Jaya

9-14
Numerical studies on the behaviour of intermediate length cold formed steel lipped channel compression members

V. Marimuthu, M. Saravanan, P. Prabha, S. Sabareshwaran, S. Arul Jayachandran

15-19
A computational analysis of the time-variant structural response of the deck of a reinforced concrete road bridge due to corrosion of reinforcing steel

Soumendra Banerjee, Amlan K. Sengupta

20-28
Computer modelling, design and analysis of piezoresistive MEMS accelerometer for concrete SHM applications

S. Kavitha, R. Joseph Daniel, C. Antony Jeyasehar, K. Sumangala

29-34
Comparative performances of three GA based multi-objective algorithms for optimal design of laminate composites

K. Lakshmi, A. Rama Mohan Rao

35-42
Effect of sodium hydroxide on flow and strength of fly ash based geopolymer mortar

Subhash V. Patankar, Sanjay S. Jamkar, Yuvraj M. Ghugal

43-47
Performance of galvanized rebars in inhibitor admixed concrete under accelerated corrosion conditions

M.S. Haji Sheik Mohammed, G.M. Samuel Knight, R. Srinivasa Raghavan

48-55
High performance concrete using bottom ash as fine aggregate

M. Purushothaman, Rm. Senthamarai

56-60
Modal characteristics based computational approaches for structural damage identification

V. Srinivas, C. Antony Jeyasehar, Saptarshi Sasmal, K. Ramanjaneyulu

61-68
Studies on special strain gage configuration for evaluation of existing stress in concrete structures by hole drilling technique

S. Parivallal, K. Ravisankar, K. Nagamani

69-76
Behavior of fire damaged concrete cylinders with carbon fibre reinforced polymer wrap under monotonic compression

Y. K. Guru Prasad, Ananth Ramaswamy

77-83
Experimental study on behaviour of segmental joints

S. Saibabu, R. Jayaraman, N. Lakshmanan, Nagesh R. Iyer

84-89
Performance and efficiency of joints in precast members

K. Subramanian, M.J. Gopinathan

90-95
Numerical simulation of shock response of steel-concrete composite panels

N. Anandavalli, N. Lakshmanan, G. M. Samuel Knight, J. Rajasankar

96-101
Predictor-corrector algorithm for pseudo-dynamic testing towards seismic performance evaluation of structures

K. Sathish Kumar, C. Antony Jeyasehar, K. Muthumani, Nagesh R. Iyer

102-106
Comparison of force-based and displacement-based methods for seismic design of buildings

Jiji Anna Varughese, Devdas Menon, A. Meher Prasad

107-112
Response of a bridge isolated with FPS to earthquake ground motion

A. Krishnamoorthy

113-116
Response of contained masonry infilled frames due to earthquake forces

M. Mahadev Achar, D.S. Prakash, R. Ramesh Babu

117-124
Studies on residual strength characteristics of slurry-infiltrated fibrous concrete

V. Bhashya, S. Sundar Kumar, G. Ramesh, B.H. Bharatkumar, T.S. Krishnamoorthy

125-134
Load deflection characteristics of HPC beam with GFRP rebars

S. Gowrisankar, G. Dhinakaran, C. Antony Jeyasehar

135-139
Strut and tie model for the analysis of RC beam-column joints reinforced with non-metallic reinforcements

Saravanan Jagadeesan, G. Kumaran

140-145
Continuous vs integral bridges - primary and secondary effects

Navin K. Choudhary, S.K. Duggal, P.K. Mehta, Sheo Gopal

146-151

Technical Notes

Utilization of copper slag and ferrous slag as partial replacement of fine aggregate in cement concrete

S. Meenakshi Sudarvizhi, R. Ilangovan

152-157